Volume 5, Issue 3 (2017)
ECOPERSIA 2017, 5(3): 1837-1847 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Pazhouhan I, Najafi A, Kamkar Rouhani A, Vahidi J. Extraction of Individual Tree Parameters by Using Terrestrial Laser Scanner Data in Hyricanian Forest. ECOPERSIA 2017; 5 (3) :1837-1847
URL: http://ecopersia.modares.ac.ir/article-24-4741-en.html
URL: http://ecopersia.modares.ac.ir/article-24-4741-en.html
1- Ph.D. Student, Department of Forestry, Faculty of Natural Resources, Tarbiat Modares University, Noor, Iran
2- Associate Professor, Department of Forestry, Faculty of Natural Resources, Tarbiat Modares University, Noor, Iran
3- Associate Professor, Faculty of Mining, Petroleum and Geophysics, Shahrood University of Technology, Shahrood, Iran
4- Assistant Professor, Department of Mathematics, Iran University of Science and Technology, Tehran, Iran
2- Associate Professor, Department of Forestry, Faculty of Natural Resources, Tarbiat Modares University, Noor, Iran
3- Associate Professor, Faculty of Mining, Petroleum and Geophysics, Shahrood University of Technology, Shahrood, Iran
4- Assistant Professor, Department of Mathematics, Iran University of Science and Technology, Tehran, Iran
Abstract: (5948 Views)
Background: In this study for the first time terrestrial laser scanning survey was implemented on upland Hyrcanian forest, through which a and new method was applied to automatically extract DBH and tree position as a necessary step for height calculation and fitting the clustering as a circle.
Materials and Methods: Tree height extracted by fixing a cylinder around the trees center. The accuracies of these methods were investigated by field measurement. Among 4 shapes fitting algorithm, Monte Carlo had more suitable result to fitting circle in each height above the ground.
Results: Tree detection rates were 85% for Carpinus betulus and 87% for Diyospyrus lotus with respect to field measurement. R2 and RMSE for DBH measurement were 0.98, 2.06 cm for Carpinus betulus and 0.98, 1.26 cm for Diyospyrus lotus. Value of R2 and RMSE for height measurement were 0.96, 3.37 meters and 0.93, 3.02 meters for Carpinus betulus and Diyospyrus lotus, respectively.
Conclusions: The accuracy of DBH by TLS is very suitable, and about the height of trees we extracted underestimated value in comparison to field measurement and that we need to develop more effective algorithms in order to reach more accurate measurement of trees’ height in Hyrcanian forest.
Materials and Methods: Tree height extracted by fixing a cylinder around the trees center. The accuracies of these methods were investigated by field measurement. Among 4 shapes fitting algorithm, Monte Carlo had more suitable result to fitting circle in each height above the ground.
Results: Tree detection rates were 85% for Carpinus betulus and 87% for Diyospyrus lotus with respect to field measurement. R2 and RMSE for DBH measurement were 0.98, 2.06 cm for Carpinus betulus and 0.98, 1.26 cm for Diyospyrus lotus. Value of R2 and RMSE for height measurement were 0.96, 3.37 meters and 0.93, 3.02 meters for Carpinus betulus and Diyospyrus lotus, respectively.
Conclusions: The accuracy of DBH by TLS is very suitable, and about the height of trees we extracted underestimated value in comparison to field measurement and that we need to develop more effective algorithms in order to reach more accurate measurement of trees’ height in Hyrcanian forest.
Article Type: مقاله Ø§Ø³ØªØ®Ø±Ø§Ø Ø´Ø¯Ù‡ از پایان نامه |
Subject:
Forestry
Received: 2016/10/16 | Accepted: 2017/05/6 | Published: 2017/09/1
Received: 2016/10/16 | Accepted: 2017/05/6 | Published: 2017/09/1
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |